Skip to main content

How to buy inexpensive Virtual Reality Glasses?

Do you want to experience the world of Virtual Reality? Great! That's not only simple but inexpensive as well. Forget about Oculus, HTC Vive or PSVR, you can experience this world in just a few bucks.

Order Google cardboard or VR Box or Universal 3D VR glasses from any online seller i.e. Amazon, Flipkart, Alibaba etc.

I have bought one from Alibaba at a very less price.

Few things to keep in mind while buying from Alibaba:
  • Product reviews: Reviews must always be the first thing you check while shopping online. Product reviews will tell you it's quality and durability.
  • Seller feedback: Always prefer buying from seller having atleast 95% positive feedback. This may happen that your order never gets delivered or opening a dispute doesn't solve the issue. So, buy only from seller with good feedback. 
  • Shipping cost: Less shipping cost is always good, look for sellers giving free shipping.
  • Size of headset: One important point to consider, whether it will hold you phone or not? Do check for headset size before buying a VR headset.
After you have made your choice, buy it and wait for your virtual reality headset to come home.

Well, after buying it from Alibaba do not click "Confirm Order Received" before receiving your product because confirming it won't allow you to open a dispute in case of any issues with your delivered product.

Comments

Popular posts from this blog

Controlling Servo Motor with BLYNK app over WiFi

Hello Shippers, hope you are having a great time! Today, we are gonna build a simple project of controlling servo motor with BLYNK app over Wifi.
Overview: The slider on the blynk app will send a value to the NodeMCU/ESP8266 and this value will be written on PIN 8 and the servo rotates that much degrees. That's the way we are controlling servo motor. Ahaa!


Things we need:Hardware:Servo SG90NodeMCUMicroUSB cableJumper WiresSoftware:Arduino IDEBLYNK appCircuit:
Connections:D8 pin of NodeMCU connects to Command pin of Servo Motor.3V3 PIN of NodeMCU connects to Power PIN of Servo motor (usually RED one).GND PIN of NodeMCU connects to GND of servo motor (usually BLACK one). Simple connections, huh!
BLYNK app Setup on phone:Create a New Project in BLYNK app.Write Project Name and Select ESP8266 or NodeMCU from dropdown.An AUTH token will be sent to your registered email, note this down.Tap on the screen and add a SLIDER widget on the screen.Tap on the Widget, select Digital PIN 8 and Start…

Time scheduled electric switch controlled with Blynk app

Most of the times when we go out of home for some days, we think of having some device that could switch ON/OFF (let's say) Refrigerator (or any other important appliance)for some hours during the day. Today, we are going to make such time scheduled electric switch which switches ON/OFF at times which we set the in our Blynk app. Woah!

Let's begin!
Things we need:
Hardware:5V relayNodeMCUJumper wiresBreadboard3V3 and 5V power sourceElectrical WiresSoftware:Arduino IDEBLYNK app It's circuit is same as we have created for our Smart Switch. So, if you already have that circuit set up, go ahead with Blynk app set up and Start playing.
Circuit:
Connections:D5 pin of NodeMCU connects to IN1 pin of 5V relay.3V3 of NodeMCU connects to 3V3 powers source and GND to GND.Vcc of relay connects to 5V source and GND to GND.Live wire is connected directly to appliance.Neutral wire from source comes to relay NC pin and another wire goes out from COM pin which is connected to the appliance.Let…

Color changing LED Strip with BLYNK app

Hello Sailors! Have you ever thought to own a color changing LED strip, so you could change it's color based on your mood, yes I am taking about Mood Light. Today,  we are back with one more interesting IOT project where are going to create a mood light(LED strip) with BLYNK app. Sounds Romantic, hmm!

Let's Rock' n Roll.
Overview: BLYNK app will send message to your NodeMCU over Wifi, these signals will be translated by NodeMCU and LED strip will change color as received in the message.
Things we need:Hardware:SMD 5050 Led Strip (Color changing LED strip)Jumper WiresTIP 120/122 NPN transistor Buying this from local shops would be a better option12V & 3.3V SupplySoftware:Arduino IDEBLYNK AppCircuit: Connections:D5 pin is connected to TIP 120 NPN(U1) transistor's Base pin.D6 pin to Base pin of U2.D7 pin to Base pin of U3.U1, U2 and U3's Collector pins are connected to respective LED color pinU1, U2 and U3's Emitter pins are grounded. Grounded, That's sad!No…